BioCure 500 Packet

Using BioCure 500 provides your clients with

a safer treatment and healthier environment.

 

BioCure 500 provides you with

improved results, savings in time, materials and equipment.

Mold Remediation Compliance:

All Mold Remediation work shall conform to the Institute of Inspection Cleaning and Restoration Certification (IICRC), specifically IICRC S520 - Standard Reference Guide for Professional Mold Remediation, latest edition.

Preparation and Application:

  • Prepare your mold remediation project as normal, i.e. containment, negative air, etc.
  • Complete your demolition
  • HEPA vacuum and wipe down areas prior to BioCure 500 application
    • Wire brushing or detailed cleaning of framing members, may not be required depending on the buildup of contamination
    • Air scrubbing may not be required, providing BioCure 500 has been applied properly.
  • Shut down the negative air.
  • Apply BioCure 500 FOAM onto all exposed framing and other surfaces - Horizontal or Vertical
  • Seal back the containment.
  • Return after 24 hours;
    • Clear areas for BioCure 500 Gas with GasAlert Extreme
    • Conduct your quality control checks with BioReveal Sure System II
    • Encapsulate
  • The areas are now ready for clearance testing

Whole House Environmental Treatment:

  • Prepare your mold remediation project as normal, i.e. containment, negative air, etc.
  • HEPA vacuum and wipe down areas prior to application.
  • Shut off natural gas or propane appliances
  • Remove filters from the HVAC system, set HVAC to fan only
  • Place activated BioCure 500 solution in sufficient quantity based on volume of area to be treated by return air registers
  • Return after 24 hours;
    • Clear areas for BioCure 500 Gas with GasAlert Extreme
    • Conduct your quality control checks with BioReveal Sure System II
  • Area is ready to reoccupy